http://forums.tripwireinteractive.com/s ... ostcount=4

1.Click on "Start", then select "Run", type "cmd" and press Enter or click "Ok". This will bring up a command prompt.
2.Type "telnet speedtouch", or if that doesn't work then type "telnet 192.168.1.254".
3.You will be prompted to login to the modem with a username/password. The default is one of the following: Username: Administrator
Password: None (leave this field blank)
OR:
Username: admin
Password: admin
If neither of those combinations work, please contact your Internet Service Provider for assistance.
4.Once you have logged in, you will be presented with the command line of your modem. This is where you must enter the following commands:
◦Type connection bindlist and press enter. This will list connection bindings.
◦Look for a line that contains "GAME" and some port numbers. For example: GAME(UDP) udp 27010-27011
◦Enter the command: connection unbind application=GAME(UDP) port=27010-27011 and press enter. The port numbers in this command must match the numbers that are listed in your GAME port listing, similar to the example above.
5.Try joining a KF game and see if that fixes things. You might have to issue the command saveall to save the changes.

This helped me with L4D2 loading crashes and disconnects after 20seconds, maybe it can help some of you who have speedtouch modem/router.

Speedtouch? Neve heard of it. Is is something your ISP supplied to you or your bought?

ISP provided modem/wireless router. Thomson Speedtouch st780

The ugly duckling below.



webpage... http://www.thomsonbroadbandpartner.com/ ... hp/?id=125

10-4